Closed Molding Resins (Unsaturated Polyester Vinyl Ester Resin)

Discover high-quality Closed Molding Resins (Unsaturated Polyester Vinyl Ester Resin) at our factory. We offer durable and reliable products for your manufacturing needs.
Request a Quote

PRODUCTS DETAILS

  • Overview
  • Product Description
  • Product Parameters
  • Packaging & Shipping
  • Company Profile
  • Laboratory
  • FAQ
Overview

Basic Info.

Model NO.
Closed molding resins
Ortho Blending
Fast Cure Industrial Parts. Low Shrinkage.
Ortho
Nacelle Covers, Marine, Transportation etc. Thick
Specification
20kg, 220kg, 1100kg
Trademark
Promisechem
Origin
Changzhou China
Production Capacity
10000mts/Y

Product Description

Closed Molding Resins(Unsaturated Polyester /Vinyl Ester Resin)
Product Description

Closed Molding Resins Application Attention

- Strong recommended that gel time should be checked in the customer's plant, as storage, temperature, humidity and catalyst will produce different gel time from that mentioned. The catalyst level should not exceed 2.0 % or fall down below 1.0 % for proper cure. Recommended range is within 1.0 % ~ 2.0 % at 25ºC being ideal. This product should not be used when temperature is below 15ºC, as curing may be adversely affected.
Closed Molding Resins (Unsaturated Polyester Vinyl Ester Resin)

Closed Molding Resins Shelf life

3 months when stored in original sealed containers below 25ºC, away from direct heat, sunlight and rain.

Closed Molding Resins Safety attention

- Resin solutions contain volatile and flammable monomers such as styrene(flash point : 31ºC)
- The resin should be handled and used in well ventilated, flame proof areas
- To wear gloves and goggles to guard against any skin/ eye irritation arising from the presence of styrene. Under no circumstances must accelerators be mixed with peroxide catalysts as it can cause explosions.
- Transportation should according to the State Council "Chemistry Dangerous Articles Safety Management Regulations" due to it contains styrene monomer.
inflammable.  
Product Parameters
Resin characteristics - Low viscous, medium reactive resin - Superior fiberglass wetting out
- Pre-accelerated, non-waxed - Exotherm controlled with low shrinkage
Liquid resin properties Density at 25ºC : 1.05 - 1.1 approx. - B/F RV, spindle No.2, 50rpm, at 25ºC
Viscosity at 25ºC : 100 - 200 mPa.s Solid content : 55 - 70%
Reactivity - Test temperature : 25ºC - Gel time : 20 - 100min
- Catalyst system : 2.0 pbv MEKP - Peak exothermic : 110 - 140ºC
- Resin quantity : 100g
Full lines resin for RTM,L-RTM and Vacuum infusion process.
Product type Application
Ortho Nacelle covers, marine, transportation etc. Thick lamination.
Ortho blending Fast cure Industrial parts. Low shrinkage.
ISO-UPR Marine, amusement parts etc.
ISO blending Fast cure, low shrinkage.
General VER Good chemical resistance. General purpose, Thick lamination.
Clear VER Carbon product etc.
VER blending Fast cure, low shrinkage. Skin coat.
Attention: Gel time varies in 15-100mins.Catalyst indicator available
 
Packaging & Shipping
Closed Molding Resins  Package
20kg,220kg,1100kg.
Closed Molding Resins (Unsaturated Polyester Vinyl Ester Resin)
Closed Molding Resins (Unsaturated Polyester Vinyl Ester Resin)
Closed Molding Resins (Unsaturated Polyester Vinyl Ester Resin)
Closed Molding Resins (Unsaturated Polyester Vinyl Ester Resin)
Closed Molding Resins (Unsaturated Polyester Vinyl Ester Resin)
Closed Molding Resins (Unsaturated Polyester Vinyl Ester Resin)
Company Profile

We focus on composites resin business and have a tolling plant in Changzhou city. We can supply all kinds of modified resin to feed up your solutions for composites. The business covers the total composites industry.
Closed Molding Resins (Unsaturated Polyester Vinyl Ester Resin)

Laboratory

Closed Molding Resins (Unsaturated Polyester Vinyl Ester Resin)

FAQ

Q1:Do you provide sample for the trial?
A1:We could supply small size package for free.but we have to charge the freight.

Q2.Could you supply customized products friendly?
A2: Yes,we do.We have a team to sever in Fortune 500 and be able to supply products to satisfied with the end-users' technical requirement.

Q3. What about your lead time? 
A3: Generally 2-4weeks after the order confirmed.

Q4. What are your terms of payment?
A4:Usually we do EXW, FOB, CIF, and DDP.


 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours